ShaftPanel™
Lead times
Dedicated Sertus delivery
:format(webp):blur(10))
:format(webp):blur(10))
At a Glance
:format(webp):blur(10)){kind=icon}
Up to 40 mm overall construction tolerance
:format(webp):blur(10)){kind=icon}
Engineered SLD aperture
:format(webp):blur(10)){kind=icon}
Construction-stage fall protection
:format(webp):blur(10)){kind=icon}
Sealed for shaft air leakage testing to BS EN 1026:2016
:format(webp):blur(10)){kind=icon}
Pre-assembled temporary infill panel
:format(webp):blur(10)){kind=icon}
Developed and tested with the Sertus SLD
Key Features
Accommodates up to 40 mm overall construction tolerance in solid construction smoke shaft openings
Provides a consistent, precisely formed aperture for installation of the Sertus SLD
Pre-assembled temporary infill provides fall protection during construction
Sealed infill enables smoke shaft air leakage testing before SLD installation
Provision for first-fix cabling ahead of SLD installation
Engineered and tested for use with the Sertus SLD, supporting a consistent installation
Sizes & Materials
Available to suit the complete Sertus SLD size range
Suitable for SLD free areas up to 1.03 m²
Powder-coated steel and lightweight calcium silicate fireboard construction
Supplied with pre-assembled temporary infill panel
Anchor bolts and fire-tested sealant supplied
Certifications
Sertus ShaftPanel™ has been developed and tested for use with the Sertus Shaft Louvre Damper (SLD). Fire performance classification and certification relate to the tested SLD assembly, rather than ShaftPanel as a standalone product.
Fire Performance & Compatibility
Fire tested to BS EN 1366-10:2011+A1:2017
Classified to BS EN 13501-4:2016
SLD certified to BS EN 12101-8:2011
Fire resistance classification: EIS 120
Temporary Infill Protection & Testing
Load tested to BS EN 6180 (Approved Document K)
Impact tested to BS EN 13049
Air leakage tested to BS EN 1026:2016
Description
Tech Specs
Solid construction smoke shafts (masonry and concrete)
Sertus Shaft Louvre Damper (SLD)
Up to 40 mm overall
EIS 120 (tested SLD assembly)
BS EN 1366-10:2011+A1:2017 (with SLD)
BS EN 13501-4:2016 (SLD assembly)
BS EN 12101-8:2011 (SLD certification)
BS EN 6180 (Approved Document K)
BS EN 13049
BS EN 1026:2016
1.03 m²
Powder-coated steel and lightweight calcium silicate fireboard
Pre-assembled, removable panel with rubber seal
Temporary infill panel provides construction-stage fall protection
Anchor bolts supplied
Fire-tested sealant supplied
Provision for supply cables
Fire performance classification and certification relate to the tested Sertus SLD assembly and not to ShaftPanel™ as a standalone product. Refer to the SLD Technical Data Sheet for further information.
Downloads
:format(webp):blur(10)){kind=icon}
ShaftPanel™ accommodates construction tolerances in solid construction smoke shafts, providing the precise aperture required for installation of the Sertus Shaft Louvre Damper (SLD). This helps reduce remedial works and simplifies on-site coordination.
ShaftPanel™ accommodates up to 40 mm overall construction tolerance.
Yes. The pre-assembled temporary infill panel provides fall protection during construction, subject to the tested installation arrangement.
Smoke shafts should be air leakage tested before the SLD is installed. ShaftPanel™ features a temporary infill with an integrated rubber seal, removing the need to seal damper openings with temporary materials. Tested to BS EN 1026:2016, the infill has a known leakage rate, allowing contractors to account for this when assessing overall shaft leakage.
ShaftPanel™ has been developed and tested specifically for use with the Sertus Shaft Louvre Damper (SLD).
Yes. ShaftPanel™ includes provision for SLD supply cables to be installed during first fix, ahead of final damper installation.
ShaftPanel™ is designed for installation into solid construction smoke shafts, with a C-stud and plasterboard lining forming part of the installation arrangement. Refer to the Sertus technical installation guidance for the required lining specification and installation details.
No. ShaftPanel™ has been fire tested with the Sertus SLD without a finished wall. This gives building designers flexibility to specify the final wall finish without affecting the tested arrangement, provided the installation follows the approved technical details.
No. ShaftPanel™ is supplied with precise internal dimensions to accommodate the Sertus SLD, eliminating the need for additional internal lining before damper installation.
Find the right system for your project
:format(webp):blur(10))
:format(webp):blur(10))
:format(webp):blur(10))
:format(webp):blur(10))
:format(webp):blur(10))
:format(webp):blur(10))
:format(webp):blur(10))
:format(webp):blur(10))
